Masonry Wall Joint Reinforcement Mesh, Anti Cracking Mesh Fabric

Welded Fabrics of galvanized after weld (GAW) processing are popular for Masonry Reinforcement. The mesh panel is normally located in the bed joint to strengthen masonry panels without thickening the wall. It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.

The longitudinal steel wires are flattened to ensure good mortar cover even when lapped or used with wall ties. Cross wires are welded in the same plane as the main wires at 450mm centres.

Masonry wall reinforcing mesh can be made from materials of stainless steel or galvanized steel. Stainless steel provides the user with the greatest corrosion resistance and life-cycle costing benefits, and is suitable for use in any application. Galvanised steel mesh is not suitable for use in the external leaf of a cavity wall.

Welded Anti-Crack Reinforcing Mesh Welded Wire Forms
   

Size:Normally 3 meters long,
the space distance is 40cm,
and different Width5,10,15,20cm

Processing of Mesh Work:
1. Welded after hot dipped galvanized,
2. Welded after electro galvanized
3. Welded before electro galvanized,
4. Welded before hot dipped galvanized,
5. Welded by stainless steel wire.

Uses:
It is used primarily as anti-cracking reinforcement in the construction of brick and block masonry.